In some applications, it is a requirement that there are two independent means of starting the engine. This is a potentially complex and difficult operation, but Marine Pro controllers are able to control two separate starting systems effectively.
Auto-Maskin DCU 210E and DCU 410E engine controllers can now control Volvo Penta engines with EMS 2.0, 2.2 and 2.3 software equipped ECM’s. This increases accuracy, simplifies installation and wiring, provides consistent control strategies for Volvo specifiers, and finally provides Volvo generating set makers a modern local panel solution.
Auto-Maskin has a history of reaching out to the community, and this was the case for Auto-Maskin UK sponsoring Oundle RFC U16 Rugby.
Miles from land, open ocean, bad weather. It’s a good feeling knowing you have Auto-Maskin’s “Marine Watch” system onboard watching every alarm and level, letting you take care of vessel business.
The RIO 425 brings all the AC alternator information straight to the DCU, replacing the panel showing AC parameters traditionally mounted on the generator.
Introduction of Marine Watch at Seawork this summer drives new business. Auto-Maskin exhibited at Seawork International this summer, introducing Marine Watch to visitors and exhibitors alike.
Repower of a pushboat leads to advanced monitoring. The Dutch pushboat, MS Statum, was recently repowered with Yanmar machinery.
As part of Governor Control Systems Inc's (GCS) kickoff of their campaign as our new Distributor in the Americas, Auto-Maskin's products were prominently displayed at GCS' stand at Inland Marine Expo Exhibition.
The week of 26 June, Geary Long and Don Johnson conducted a training seminar with Governor Controls Systems (GCS) at their Fort Lauderdale headquarters. GCS had 14 attendees for the training session ranging from sales people to engineers.
It speaks volumes about the reliability and forward thinking typical of Auto-Maskin that the products in the Marine Pro 300 Series have been high volume sellers for a very long time!
The Construction and Shipping event held in Gorinchem, Holland, is an occasion where there is just as much networking as direct selling, with late starts and late finishes enjoying the excellent catering provided.
The company Governor Control Systems Inc in Florida (GCS - a Motor Services Hugo Stamp Company) and Auto-Maskin LLC recently signed a Distributor Agreement, beginning a new partnership in the Americas.
Diesel engines, control panels, wiring harnesses, sensors, it always seems so complicated doesn't it? It does not have to be, especially if you are the owner of a Cummins propulsion engine of less than 15 liters.
Auto-Maskin linked with their distributor for South East Asia, Barcol air Engineering, and exhibited a broad range of products in their booth within the Norwegian Pavilion.
Auto-Maskin distributor for the Benelux, Barendrecht Trading B.V. has recently worked with Damen Dredging in designing and manufacturing a custom built control system with the new DCU 210E engine panel to support a Booster pump utilizing a Volvo Penta engine.
After much consideration, Auto-Maskin was chosen to provide our new engine controls and the new “Marine View” Vessel Management System. From an operator standpoint we couldn’t be happier with that decision!
Auto-Maskin AS in Skjetten, Norway is pleased to announce that the Company's Environmental Management System [EMS] has been certified to the international standard ISO 14001:2015.
Auto-Maskin hereby inform their customers, suppliers, and other relations that all shares in the company Auto-Maskin AS are acquired by Lifco AB. Auto-Maskin will continue to operate under its own brand and its current management.
Auto-Maskin has been working flat out with the Caterpillar Government Marine Excellence Center in Perth, Western Australia to develop a unique multi-station alarm and monitoring package to suit a pair of 3500 series main engines.
Auto-Maskin held a 4 day training course for 18 representatives of its SE Asia Distribution network for Sales Management and Technicians on the latest Marine Pro product line and applications.
Auto-Maskin will be exhibiting at the Southampton, UK located show from 13 June – 15 June inclusive.
From 30 May to 2 June inclusive, Auto-Maskin will be at the largest Marine Fair in Europe this year, Norshipping. Just 10 minutes down the road from our headquarters in Skjetten, the exhibition is a massive showcase for all elements of the marine industry, and Auto-Maskin will be there at Booth E01-30.
With the appointment of Barendrecht Trading BV and the inclusion of the skills of Johan Barendrecht, Auto-Maskin AS has gained a valuable partner in the Benelux area.
Auto-Maskin has completed the delivery of a tailored emergency power management system for Avinor’s Oslo Air Traffic Control Center in Røyken.
Submit this form to get a quote back from us. If you don't know the exact components you need, or want us to add any engineering work or to build the components into a whole system, put your needs into the box for extra information and upload any descriptions.
On November 18th 2010, Lido Marine - the China distributor to Auto-Maskin - held a training event for Cummins Marine Engine dealers in China.
During the annual refit of the MV Gry Maritha, which provides the vital freight and occasional passenger link to the Isles of Scily from Penzance in the UK, Auto-Maskin UK upgraded the obsolete current system to the current Marine Pro panel products.
Back in 2007, Cummins Marine, after an extensive selection process, chose Auto-Maskin to be their provider of panels to compliment the QSK range of engines designed for EPA and EU Tier 2 emission compliance and on into the future. This comprehensive range of panels is marketed as the C Command range of products exclusively via the Cummins Distribution channel globally.
With the ever rising cost of fuel, providing data to allow owners and operators to reduce the amount of fuel consumed can be the key to a vessel’s increased profitability. Auto-Maskin has provided a customized solution for Bourbon Offshore.
