The RP 420E is a cyber secure IACS-approved remote touchscreen panel for twin-engine configurations with 200 Series or 400 Series of Marine Pro engine controllers. It has a high resolution, sunlight capable screen and is fully weather protected with weather tight connectors.

The RP 420E retains several IACS Society Approvals and can monitor and control one or two Marine Pro 200 Series or 400 Series DCUs. The panel is also truly self-configuring. Any changes in any engine controller’s configuration are immediately reflected into the RP 420E without any operator actions.

If more than two DCUs are in use or a larger screen is needed, the RP 480i Remote Panel with it’s 12″ touchscreen can control up to eight Marine Pro 200 Series or 400 Series engine controllers.

There is no practical limit to how many RP 420E remote panels that can be connected to one engine controller.

Note! A Basic Harness Kit (P/N: 1006946)  including one prewired Deutsch DT-connector with a 2 m power cable and three sealing blind plugs for easy installation is available and if needed, this must be ordered separately.

Compatible products

The RP 420E can be attached to the following products:

Engine Controllers

Legacy Engine Controllers

Note! When replacing an old Marine Pro unit with a new we recommend to update the Firmware of other vital components as well.

Accessories