The RP 206E Remote Panel, a twin engine remote panel for Marine Pro 200 and 400 series controllers, is a high-resolution marine display for engine alarming and visualization. Designed for manoeuver and wing stations. Out of the box the RP 206E includes operator-selectable inbuilt languages, fuel consumption measurements, unit selection, event log and many more features that vessel operators appreciate at sea.
The RP 206E Remote Panel, a twin-engine remote panel for Marine Pro 200 and 400 series controllers, is a high-resolution marine display for engine alarming and visualization. Designed for manoeuver and wing stations. Out of the box the RP 206E includes operator-selectable inbuilt languages, unit selection, event log and many more features that vessel operators appreciate at sea.
The ultra-crisp touch screen, colour graphics, and fully protected front and rear provide the best readability and reliability under all weather conditions. Capable of displaying up to two engines with a complex set of sensor data.
The RP 206E auto-configures to any 200 and 400 series controllers, which truly reduces installation and maintenance costs. Like the RP 220E, the RP 206E is capable of monitoring two DCUs or Engines.
Compared to the RP 210E remote panel, the RP 206E is a monitor only remote panel for when one wants to maintain operational security.
RP 206E highlights:
The panel connects to DCUs using only a standard Ethernet cable, and will automatically “find” any DCUs that are connected to the network. No configuring, no setup, no hassle. Additionally, when connected, the RP 206E will update itself with any DCU configuration changes automatically, providing seamless consistency across all panels.
Using the brightness-adjustable touch screen, the operator gets full overview and control of the equipment, exactly as operating the DCU engine controller locally at the engine. The operator can select the language at the RP 206E independently of the DCU.
There is no practical limit to how many RP 206E remote panels that can be connected to one engine controller.
Note! A Basic Harness Kit (P/N: 1006946) including one prewired Deutsch DT-connector with a 2 m power cable and three sealing blind plugs for easy installation is available and if needed, this must be ordered separately.
The RP 206E can be attached to the following products:
Note! When replacing an old Marine Pro unit with a new we recommend to update the Firmware of other vital components as well.
| Size | w 167 x h 135 x d 68 mm |
|---|---|
| Cut out | w 156 x h 124 mm, Access depth 90 mm |
| Screen | 262144 colors, 5.7", Resolution 640 x 480 pixels |
| IP | IP56 |
| Power Supply , Vcc | 24/12 VDC, Min 8 VDC, Max 32 VDC |
