During a sea trial test, it’s of vital importance to store all critical parameters and measurements for immediate inspection and analysis. Auto-Maskin’s SEA TRIAL TOOL lets you make instant snapshots of all I/O’s by the click of a button. Inspect them at your convenience and store them for quality assurance and documentation purposes.

Vessel sea trials require parameters to be logged as evidence of quality assurance, engine and vessel performance. Today this is primarily a manual, time consuming, cumbersome and inaccurate process which usually cannot be performed swiftly at “steady-state” conditions. With the introduction of the Sea Trial Tool, this is now all in the past.

Auto-Maskin has now incorporated the Sea Trial Tool, a “press-to-record” functionality, in the DCU 210E/410E engine controllers. This tool gives a consistent way of recording engine data instantaneously, meeting the highest requirements to accuracy.

The Sea Trial Tool greatly simplifies the data sampling during vessel sea trials, this is how it works.

The Sea Trial Tool, when enabled in the DCU, logs all pre-set parameters with a click of a button and provides a recorded digital log at that instant moment. When the sea trial is completed, the log-file can be downloaded via USB for analysis. The sampled data includes both data from any connected I/O, including I/O from expansion units (hard-wired or communication), or data based on internal calculations, such as engine state and other significant parameters.

The Sea Trial Tool

  • Significantly simplifies data collection
  • Reduced time and cost on sea trials
  • Provides historical records digitally
  • Comparable data records in case of future performance challenges
  • All data points collected at the same and correct time
  • Data collection quality is independent of operator
  • Same sensors as operational vessel provides consistency
  • Control system functionality is fully operational during data collection
  • Significantly reduces administration of reports

Accurate  –  Quality assured  –  Lower cost

iAdd

Functionality when you need it

iAdd is an advantageous cost-save concept available on all 200 and 400 Series engine controllers. It provides a method of enabling/disabling a feature or a feature set, when it is required by the project, thus it only drives cost when needed. The functionality is easily enabled using a licence-key that enables the functionality for the product. This way, the functionality of the product can be added either when ordering the unit or on the after-market function. The licence-key is provided electronically and is entered into the product using the unit’s web interface. The key contains encrypted information of which features are enabled.

Easy as that!