
SEARCH

RP 410 Remote Panel

P/N: 1006452

The RP 410 colour touchscreen panel

The RP 410 is an 8.4” transflective colour touchscreen with full VGA definition. Suitable for consul mounting, the RP 410 is the clearest, safest way of communicating the condition and operating parameters of the equipment to the crew.

With simple, easy to use “touchscreen” functionality, the information and controls are displayed graphically and with icons for navigation. Highly effective for use in direct sunlight, but also equipped with auto dimming and a night mode, the RP 410 can be installed anywhere on the vessel. The unit connects to the DCU modules via a simple Ethernet connection, or via Ethernet switches if multiple panels required.

The RP 410 is approved by 10 Classification Societies, including supporting all requirements for Master panel, Active station and remote alarm suppression. It also supports multiple engines and accessories.

Why more customers select the RP 410

The RP 410 requires no on site configuration. Once connected to the DCU, it automatically configures itself. With 10 languages installed as standard, with easy “on the fly” changes, operation becomes safer and clear. The Owner can select from 20 different templates to provide the preferred panel layout, and uploading and downloading of files (including wallpapers) and information can take place using the USB connection.

By using the password protected areas, certain parameters of the panel can be adjusted locally if required. Additionally, by reading the J1939 CANbus available on most electronic engines today, the RP 410 will deliver fault codes, not only as a numeral, but as a plain text description of the event / alarm, providing clear indication to allow operators to take the appropriate actions. Multiple engines can be displayed on a single panel (1 – 8 limit), and up to four engines on a single page.

The RP 410 can also support up to 4 IP cameras, either to monitor engine spaces or provide security coverage, all without a dedicated CCTV system.

#1 Benefit – Clear, precise indications

8.4” Transflective touchscreen panel, 800 x 600 pixel
Auto dimming dependant on ambient and night mode
Multiple Sounds available and linked to specific events

#2 Benefit – Ease of installation

Communicates via Ethernet – only one cable required
Multiple engines can be displayed on one panel
No special tools to connect, no configuration

#3 Benefit – No user configuration required

Automatically configures itself when connected to a DCU
Automatic “conflict” notification if new configurations loaded elsewhere
Backup possible via USB connection

#4 Benefit – Multiple monitoring positions

No practical limit to number of monitoring positions
Simple installation - connect anywhere in the ethernet network
Each RP 410 dedicated to specific DCU’s if required

#5 Benefit – Reduced operator training

Multiple languages (10) including Chinese and Russian installed
Language selectable at each station, not system wide
Intuitive operation via icons rather than text
Same user interface as on the engine panel(s)

#6 Benefit – Reduced installation cost

Single cable installation
Uses existing vessels Ethernet
Identical procedure no matter installation location / function

Back

Send link as e-mail


DCU 410 Diesel Engine Controller P/N: 1006450 The DCU 410 is the basic Supervision unit complete with a local user interface. Using a 5.7" colour screen and an IP55 front plate with integrated buttons, the unit is approved by all major Classification Societies. Product details...


DCU 408 Engine Controller P/N: 1006455 The DCU 408 is the base Supervision unit without a local user interface. Display and control outputs can be connected to RP 410 panels or a video interface module. Classification Society Approved. Product details...


SDU 410 Shutdown Unit P/N: 1006451 An engine safety shutdown unit, designed to meet Classification Society requirements, either within the 400 Series, or entirely independently. Read more...


RIO 410 Expansion Module P/N: 1006453 The RIO 410 digital and analog expansion module is designed for use within the Marine pro system. It is compatible with DCU panels in the 200 Series and the 400 Series family. When connected to the RIO link of the DCU, the DCU automatically recognizes it and adds it into the configuration. Read more...


RIO 425 AC Generator Interface P/N: 1006409 Dedicated interface module to allow display of AC Generator parameters on the DCU panel in the 200 Series and 400 Series family. When connected to the RIO link of the DCU, the DCU automatically adds a new page displaying all the most important generator parameters. Read more...


IP Camera P/N: 1121258 With the capabaility and capacity of Marine Pro, CCTV systems are yours with no extra dedicated system. The camera plugs into the ethernet network, and the captured image is displayed on the RP 410 and RP 210 remote panels. Read more...


MK-14 Relay Expansion P/N: 1121341 The MK-14 is a compact relay expansion unit, with 14 relays onboard. Each relay has a potential-free changeover contact. Use the configuration tool to configure the desired function to each relay. It can be any function available in the panel it is connected to. The MK-14 is designed for the 300 and 400 Series panels. Read more...